Sphere 3D Corporation: Form 6-K - Filed by newsfilecorp.com

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 6-K

REPORT OF FOREIGN PRIVATE ISSUER PURSUANT TO RULE 13a-16 OR 15d-16
UNDER THE SECURITIES EXCHANGE ACT OF 1934

For the month of December, 2014

Commission File Number: 000-55232

Sphere 3D Corp.
(Translation of registrant's name into English)

240 Matheson Blvd. East
Mississauga, Ontario L4Z 1X1

(Address of principal executive offices)

Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40-F.

[           ] Form 20-F   [ x ] Form 40-F

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): [           ]

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): [           ]


SUBMITTED HEREWITH

Exhibits

  99.1 Interim Financial Statements, Period Ending September 30, 2014
     
  99.2 Management Discussion and Analysis
     
  99.3 Certification of Interim Filings - CEO
     
 

99.4

Certification of Interim Filings - CFO

 


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

  SPHERE 3D CORP.
  (Registrant)
     
Date: December 1, 2014 By: /s/ T. Scott Worthington
   
    T. Scott Worthington
  Title: Chief Financial Officer

 


Sphere 3D Corporation: Exhibit 99.1 - Filed by newsfilecorp.com

 

SPHERE 3D CORPORATION
Condensed Consolidated Financial Statements (Unaudited)
For the Three and Nine Months Ended September 30, 2014 and 2013
(Expressed in Canadian Dollars)



Sphere 3D Corporation
Condensed Consolidated Statements of Financial Position
As at
(Expressed in Canadian Dollars)

    September 30,     December 31,  
    2014     2013  
    (unaudited)     (audited)  
Assets            
Current            
Cash and cash equivalents $  2,988,219   $  5,550,788  
Investments   188,824     312,823  
Loans   -     203,641  
Sales tax recoverable   383,955     95,088  
Amounts receivable   3,319,797     -  
Inventory   128,758     136,591  
Advance equipment prepayment   230,446     397,702  
Prepaid and sundry assets (note 5)   601,368     142,361  
    7,841,367     6,838,994  
             
Promissory Note (note 6)   9,004,961     -  
Capital assets (note 7)   649,758     389,119  
Intangible assets (note 8)   17,203,857     1,668,079  
             
  $  34,699,943   $  8,896,192  
             
Liabilities            
Current            
Trade and other payables (note 9) $  2,574,665   $  478,282  
Contingent earn-out (note 8)   4,084,834     -  
Deferred Revenue   180,339     504,488  
    6,839,838     982,770  
             
Convertible debenture (note 10)   5,706,167     -  
    12,546,005     982,770  
             
Shareholders' Equity            
Common share capital (note 11)   22,462,692     12,085,781  
Other equity (note 12)   12,729,177     1,715,151  
Deficit   (13,037,931 )   (5,887,510 )
             
    22,153,938     7,913,422  
             
  $  34,699,943   $  8,896,192  
Nature of operations (note 1)            
Commitment and contingencies (note 15)            
Subsequent events (note 18)            

Approved by the Board “Glenn Bowman” “Peter Tassiopoulos”
  Director Director

See accompanying notes, which are an integral part of these financial statements

2


Sphere 3D Corporation
Condensed Consolidated Statements of Comprehensive Loss (Unaudited)
(Expressed in Canadian Dollars)

    Three months ended     Nine months ended  
    September 30,     September 30,  
    2014     2013     2014     2013  
                         
                         
Revenue $ 1,615,727   $  -   $  4,372,292   $  -  
                         
Cost of goods sold   873,240     -     2,147,530     -  
                         
Gross Margin   742,487     -     2,224,762     -  
                         
Expenses (income)                        
Salaries and consulting   889,281     145,785     1,966,695     886,357  
Stock based compensation   868,716     54,348     2,053,408     101,388  
General and administrative   966,079     190,706     1,763,758     515,172  
Amortization of intangibles   1,147,342     873     2,295,654     2,619  
Amortization of property and equipment   76,962     49,946     241,481     146,243  
Finance expenses (note 13)   (31,783 )   27,005     119,355     26,658  
Merger agreement costs   579,368     -     934,832     -  
                         
    4,495,965     468,663     9,375,183     1,678,437  
                         
Net comprehensive loss for the period $  (3,753,478 )  $  (468,663 ) $  (7,150,421 ) $  (1,678,437 )
                         
                         
Loss per share                        
                         
Basic and diluted $  (0.16 ) $  (0.03 ) $  (0.31 ) $  (0.10 )
                         
Weighted average number of common shares   23,566,703     17,187,594     22,880,164     16,481,568  

See accompanying notes, which are an integral part of these financial statements

3


Sphere 3D Corporation
Condensed Consolidated Statements of Changes in Equity (Unaudited)
(Expressed in Canadian Dollars)

    Number of                          
    common     Common                    
    shares     share capital     Other Equity       Deficit     Total  
                               

 

                             

Balance at December 31, 2012

  16,114,339   $ 5,409,488   $ 1,007,500   $ (3,509,487 ) $ 2,907,501  

 

                             

Issuance of warrants

  -     (203,000 )   203,000     -     -  

Exercise of warrants

  1,386,206     1,582,584     (263,650 )   -     1,318,934  

Exercise of options

  60,001     51,000     (8,000 )   -     43,000  

Share-based payments

  769,231     500,000     -     -     500,000  

Stock based compensation

  -     -     118,169     -     118,169  

Comprehensive loss for the period

  -     -     -     (1,678,437 )   (1,678,437 )

 

                             

Balance at September 30, 2013

  18,329,777   $ 7,340,072   $ 1,057,019   $ (5,187,924 ) $ 3,209,167  

 

                             

Issuance of common shares

  1,250,000     4,187,500     -     -     4,187,500  

Share issuance costs

  -     (441,178 )   -     -     (441,178 )

Issuance of warrants

  -     (657,000 )   657,000     -     -  

Exercise of warrants

  1,398,634     2,262,136     (890,878 )   -     1,371,258  

Issuance of warrants on exercise

  -     (703,000 )   703,000     -     -  

Exercise of options

  120,000     97,251     (12,500 )   -     84,751  

Stock based compensation

  -     -     201,510     -     201,510  

Comprehensive loss for the period

  -     -     -     (699,586 )   (699,586 )

 

                             

Balance at December 31, 2013Balance at December 31, 2013

  21,098,411   $ 12,085,781   $ 1,715,151   $ (5,887,510 ) $ 7,913,422  

 

                             

Issuance of common shares on acquisition

                             

of intangible assets

  1,089,867     7,133,179     -     -     7,133,179  

Issuance of special warrants,

                             

net of costs (note 12)

  -     -     9,072,526     -     9,072,526  

Exercise of warrants

  1,195,257     2,470,616     (443,733 )   -     2,026,883  

Exercise of options

  196,250     163,489     (30,389 )   -     133,100  

Share-based payments

  63,695     609,627     -     -     609,627  

Stock based compensation

  -     -     2,415,622     -     2,415,622  

Comprehensive loss for the period

  -     -     -     (7,150,421 )   (7,150,521 )

 

                             

Balance at September 30, 2014

  23,643,480   $ 22,462,692   $ 12,729,177   $ (13,037,931 ) $ 22,153,938  

See accompanying notes, which are an integral part of these financial statements

4


Sphere 3D Corporation
Condensed Consolidated Statements of Cash Flows (Unaudited)
(Expressed in Canadian Dollars)

    Nine months ended  
    September 30,  
    2014     2013  

Cash flow from operating activities

           

Net comprehensive loss for the period

$  (7,150,421 ) $  (1,678,437 )

Items not affecting cash:

           

   Adjustment for depreciation

  241,481     146,243  

   Adjustment for amortization

  2,295,654     2,619  

   Stock compensation expenses

  2,053,408     101,387  

   Expenses paid through stock issuances

  776,883     -  

   Financing expense of convertible debenture

  39,362     -  

   Unrealized loss on derivative liability

  65,631     -  

   Unrealized foreign exchange gain

  (165,117 )   -  

   Unrealized investment holding loss

  56,924     -  

Change in working capital:

           

 Change in investments

  68,434     (208,875 )

 Change in sales tax recoverable

  (288,867 )   3,003  

 Change in amounts receivable

  (3,317,192 )   -  

 Change in inventory

  7,833     -  

 Change in prepaid and sundry assets

  (459,007 )   (77,493 )

   Change in trade and other payables

  1,870,167     (116,611 )

 Change in deferred revenue

  (324,149 )   500,000  

 Change in subscriptions received

  -     150,035  

Net cash used in operating activities

  (4,228,976 )   (1,178,129 )

Cash flow from investing activities

           

Promissory notes

  (8,835,058 )   -  

Acquisition of intangible assets

  (4,618,000 )   -  

Investment in technology

  (1,411,565 )   (339,574 )

Acquisition of property and equipment

  (502,120 )   (82,861 )

Repayment of loans receivable

  203,641     -  

Net cash used in investing activities

  (15,163,102 )   (422,435 )

Cash flow from financing activities

           

Proceeds from common shares net of issue costs

  -     -  

Proceeds from issuance of special warrants, net of issue costs

  9,072,526     -  

Proceeds from warrant exercises

  2,026,883     1,318,934  

Proceeds from options exercises

  133,100     43,000  

Debenture financing

  5,597,000     -  

Net cash generated in financing activities

  16,829,509     1,361,934  

 

           

Net increase in cash and cash equivalents

  (2,562,569 )   (238,630 )

Cash and cash equivalents at opening

  5,550,788     1,633,334  

Cash and cash equivalents at closing

$  2,988,219   $  1,394,704  

See accompanying notes, which are an integral part of these financial statements

5


Sphere 3D Corporation
Condensed Consolidated Statements of Cash Flows (Unaudited) - continued
(Expressed in Canadian Dollars)

    Nine months ended  
    September 30,  
    2014     2013  
             
Non-cash Investing and Financing Activities:            
             
Issuance of common shares on acquisition of intangible assets $  (7,133,179 ) $         -  
Contingent liability for the acquisition of intangible assets   (4,031,220 )   -  
Holdback on the acquisition of intangible assets   (223,880 )   -  
             
  $ (11,388,279 ) $       -  

See accompanying notes, which are an integral part of these financial statements

6


Sphere 3D Corporation
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

   
1. NATURE OF OPERATIONS

Sphere 3D Corporation (the "Company" or “Sphere 3D”) was incorporated under the Business Corporations Act (Ontario) on May 2, 2007 and is listed on the TSXV and NASDAQ, under the trading symbol “ANY” and has its main and registered office of the Company located at 240 Matheson Blvd. East, Mississauga, Ontario, L4Z 1X1.

Sphere 3D is a technology development company focused on establishing its patent pending emulation and virtualization technology. These consolidated statements include the financial statements of the Company, its wholly-owned subsidiaries, S3D Acquisition Company., which was incorporated under the laws of the State of California on May 14, 2014, V3 Systems Holdings, Inc., which was incorporated under the laws of the State of Delaware on January 14, 2014, Sphere 3D Inc., which was incorporated under the Canada Business Corporation Act on October 20, 2009, and its wholly owned subsidiary, Frostcat Technologies Inc., which was incorporated under the Business Corporations Act (Ontario) on February 13, 2012.

The Company may have to raise additional capital to fund acquisitions and operations until such point that revenues from products and technology are able to fund operations. If the Company is not able to raise sufficient capital then there is the risk that the Company will not be able to realize the value of its assets and discharge its liabilities. To date the Company has been successful raising capital in fiscal 2013 and 2014.

2. Statement of Compliance

These condensed consolidated interim financial statements have been prepared using the same accounting policies and methods of computation as were applied in our most recent audited consolidated annual financial statements for the year ended December 31, 2013.

These condensed consolidated interim financial statements have been prepared in accordance with International Accounting Standards (“IAS”) 34 “Interim Financial Reporting” (“IAS 34”) using accounting policies consistent with the International Financial Reporting Standards (“IFRS”) issued by the International Accounting Standards Board (“IASB”) and interpretations of the International Financial Reporting Interpretations Committee (“IFRIC”).

These condensed consolidated interim financial statements do not include all of the information required of a full annual financial report and are intended to provide users with an update in relation to events and transactions that are significant to an understanding of the changes in financial position and performance of the Company since the end of the last annual reporting period. It is therefore recommended that these condensed consolidated interim financial statements be read in conjunction with the most recent audited consolidated annual financial statements of the Company for the year ended December 31, 2013, which are available at www.sedar.com.

These condensed consolidated interim financial statements were approved by the Board of Directors on November 28, 2014.

7


Sphere 3D Corporation
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

   
3. Significant Accounting Policies

The accounting policies set out below have been applied consistently to all periods presented in these financial statements as at and for the periods ended September 30, 2014 and 2013, unless otherwise indicated.

The consolidated financial statements comprise the accounts of the Company, and its controlled subsidiaries. The financial statements of the wholly owned subsidiaries are included in the consolidated financial statements from the date that control commences until the date that control ceases. Consolidated financial statements are prepared using uniform accounting policies for like transactions and other events in similar circumstances.

All transactions and balances between the Company and its subsidiaries are eliminated on consolidation, including unrealized gains and losses on transactions between companies. Unrealized gains arising from transactions with equity accounted investees are eliminated against the investment to the extent of the Company’s interest in the investee. Unrealized losses are eliminated in the same way as unrealized gains, but only to the extent that there is no evidence of impairment.

  (a) Use of estimates and judgements

The preparation of the financial statements in conformity with IFRSs requires management to make judgements, estimates and assumptions that affect the application of accounting policies and the reported amounts of assets, liabilities, income and expenses. Actual results may differ from these estimates.

Estimates and underlying assumptions are reviewed on an ongoing basis. Revisions to accounting estimates are recognized in the period in which the estimates are revised and in any future periods affected.

Information about significant areas of estimation uncertainty and critical judgements in applying accounting policies that have the most significant effect on the amounts recognised in the financial statements are noted below with further details of the assumptions in the following notes:

  (i)

Share-based payments

     
 

When charges for share-based payments are based on the equity instrument granted, the fair value is calculated at the date of the award. The equity instruments are valued using Black-Scholes; inputs to the model include assumptions on share price volatility, discount rates and expected life outstanding.

     
  (ii)

Investment in technology

     
 

The recoverability of the investment in technology is dependent on the future realization of cash flows from amounts spent.

     
  (iii)

Capital assets

     
 

The useful lives of capital assets are estimated based on the length of use of the assets by the Company.

8


Sphere 3D Corporation
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

   
3. Significant Accounting Policies (continued)
     
  (a) Use of estimates and judgements  (continued)
     
  (iv)

Income taxes

     
 

Tax interpretations, regulations and legislation in the jurisdiction in which the Company operates are subject to change. As such, income taxes are subject to measurement uncertainty. Deferred income tax assets are assessed by management at the end of the reporting period to determine the likelihood that they will be realised from future taxable earnings.

     
  (v)

Convertible debenture

     
 

The convertible debenture is a hybrid instrument that was bifurcated between its liability and derivative components. The derivative liability was valued using Black-Scholes; inputs to the model include assumptions on share price volatility, discount rates and expected life outstanding.

     
 

The derivative liability is revalued each quarter using Black-Scholes; inputs to the model include assumptions on share price volatility, discount rates and expected life outstanding.

     
  (vi)

Contingent liability

     
 

The contingent liability was valued using assumptions on revenue and discount rates.


  (b)

Foreign currency

     
 

The functional currency of the Company and its subsidiaries is the Canadian dollar. Transactions in foreign currencies are translated to the functional currency of the Company at exchange rates at the dates of the transactions. Monetary assets and liabilities denominated in foreign currencies are translated to Canadian dollars at the period end exchange rate. Non-monetary assets and liabilities denominated in foreign currencies that are measured at fair value are retranslated to the functional currency at the exchange rate at the date that the fair value was determined. Non-monetary items that are measured in terms of historical cost in a foreign currency are translated using the exchange rate at the date of the transaction.

     
  (c)

Financial instruments

     
  (i)

Non-derivative financial assets

Non-derivative financial instruments comprise of cash and cash equivalents, investments, loans, amounts receivable and trade and other payables. Non-derivatives financial instruments are recognised initially at the fair value plus, for instruments not at fair value through profit and loss, any directly attributable transaction costs. Subsequent to initial recognition non-derivative financial instruments are measured as described below.

9


Sphere 3D Corporation
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

   
3. Significant Accounting Policies (continued)
       
(c)

Financial instruments (continued)

       
(ii)

Cash, cash equivalents and investments

       

Cash and cash equivalents comprise cash on hand, term deposits with banks, other short-term highly liquid investments with original maturities of six months or less. Bank overdrafts that are repayable on demand and form an integral part of the Company’s cash management, whereby management has the ability and intent to net bank overdrafts against cash, are included as a component of cash and cash equivalents for the purpose of the statement of cash flows.

       

Investments comprise highly liquid investments, in the form of guaranteed investment certificates, with maturities greater than six months but with cashable features. Investments have been used to secure the Company’s credit rating and are therefore separated from cash and cash equivalents for the purpose of the statement of cash flows.

       
(iii)

Financial assets at fair value through profit or loss

       

An instrument is classified at fair value through profit or loss if it is held or is designated as such upon initial recognition. Financial instruments are designated at fair value through profit or loss if the Company manages such investments and makes purchase and sale decisions based on their fair value in accordance with the Company’s documented risk management or investment strategy. Upon initial recognition the transaction costs are recognized in profit or loss when incurred. Financial instruments at fair value through profit or loss are measured at fair value, and changes therein are recognized in profit or loss. The Company has designated cash and cash equivalents, investments, contingent liability and derivative liability at fair value.

       
(iv)

Other

       

Other non-derivative financial instruments, such as amounts receivable, loans and trade and other payables and convertible debentures, are measured at amortized cost using the effective interest method, less any impairment losses.

       
(d)

Convertible debenture

       

The proceeds received on issue of the Company’s convertible debenture have been recorded as a liability included in borrowings on the consolidated statement of financial position. The convertible debenture contains an embedded derivative. The Company values the embedded derivative using an option pricing model and the residual amount is allocated to the debenture liability.

       

The derivative is revalued at each reporting date with any gain or loss flowing through profit of loss. On conversion of the convertible debt to common shares the value of the derivative is taken into share capital.

10


Sphere 3D Corporation
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

   
3. Significant Accounting Policies (continued)
     
  (e)

Capital assets

       
  (i)

Recognition and measurement

       
 

Items of property and equipment are measured at cost less accumulated amortization and accumulated impairment losses. Costs include expenditure that is directly attributable to the acquisition of the asset.

       
 

When parts of an item of property and equipment have different useful lives, they are accounted for as separate items (major components) of property, plant and equipment.

       
 

Gains and losses on disposal of an item of property, plant and equipment are determined by comparing the proceeds from disposal with the carrying amount of property and equipment, and are recognized net within other income in profit or loss.

       
  (ii)

Subsequent costs

       
 

The cost of replacing a part of an item of property and equipment is recognized in the carrying amount of the item if it is probable that the future economic benefits embodied within the part will flow to the Company, and its cost can be measured reliably. The carrying amount of the replaced part is derecognized. The costs of the day-to-day servicing of property and equipment are recognized in profit (loss) as incurred.

       
  (iii)

Amortization

       
 

Amortization is calculated as the cost of the asset less its residual value.

       
 

Amortization is recognized in profit or loss on a straight-line basis over the estimated useful lives of each part of an item of property and equipment, since this most closely reflects the expected pattern of consumption of the future economic benefits embodied in the assets.

       
      The estimated useful lives for the current and comparative periods are as follows:

· Computer hardware                                                                                       - 3 years
· Furniture and fixtures                                                                                    - 5 years
· Marketing and Web Development                                                              - 2 years
· Leasehold improvements                                                                              - over the term of the lease

This most closely reflects the expected pattern of consumption of the future economic benefits embodied in the asset.

Estimates for amortization methods, useful lives and residual values are reviewed at each reporting period-end and adjusted if appropriate.

11



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

3.

Significant Accounting Policies (continued)

     
(f)

Inventory

     

Inventories are measured at the lower of cost and net realizable value. The cost of inventories is based on the first-in first-out principle, and includes expenditure incurred in acquiring the inventories, production or conversion costs and other costs incurred in bringing them to their existing location and condition. Net realizable value is the estimated selling price in the ordinary course of business, less the estimated cost of completion and selling expenses.

     
(g)

Trade and other payables

     

Trade and other payables are stated at cost.

     
(h)

Statement of financial position

     

Assets and liabilities expected to be realised in, or intended for sale or consumption in, the Company’s normal operating cycle, usually equal to 12 months, are recorded as current assets or liabilities.

     
(i)

Statement of cash flows

     

The Company prepares its Statement of Cash Flows using the indirect method.

     
(j)

Impairment

       
(i)

Financial assets

A financial asset is assessed at each reporting date to determine whether there is any objective evidence that it is impaired. A financial asset is considered to be impaired if objective evidence indicates that one or more events have had a negative effect on the estimated future cash flows of that asset.

An impairment loss in respect of a financial asset measured at amortized cost is calculated as the difference between its carrying amount, and the present value of the estimated future cash flows discounted at the original effective interest rate.

Individually significant financial assets are tested for impairment on an individual basis. The remaining financial assets are assessed collectively in groups that share similar credit risk characteristics.

All impairment losses are recognized in the statement of comprehensive loss.

An impairment loss is reversed if the reversal can be related objectively to an event occurring after the impairment loss was recognized. For financial assets measured at amortized cost the reversal is recognized in the statement of comprehensive loss.

12


 
Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

3.

Significant Accounting Policies (continued)

       
(j)

Impairment (continued)

       
(ii)

Non-financial assets

       

The carrying amounts of the Company’s non-financial assets, other than deferred tax assets are reviewed at each reporting date to determine whether there is any indication of impairment. If any such indication exists, then the asset’s recoverable amount is estimated.

       

For the purpose of impairment testing, assets that cannot be tested individually are grouped together into the smallest group of assets that generates cash inflows from continuing use that are largely independent of the cash inflows of other assets or groups of assets referred to as a cash generating unit (CGU). The recoverable amount of an asset or a CGU is the greater of its value in use and its fair value less cost to disposal.

       

In assessing value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects current market assessments of the time value of money and the risks specific to the asset. Value in use is generally computed by reference to the present value of the future cash flows expected to be derived from sales.

       
(iii)

Non-financial assets (Cont’d)

       

Fair value less costs of disposal to sell is determined as the amount that would be obtained from the sale of a CGU in an arm’s length transaction between knowledgeable and willing parties. The fair value less cost of disposal is generally determined as the net present value of the estimated future cash flows expected to arise from the continued use of the CGU, including any expansion prospects, and its eventual disposal, using assumptions that an independent market participant may take into account. These cash flows are discounted by an appropriate discount rate which would be applied by such a market participant to arrive at a net present value of the CGU.

       

An impairment loss is recognized if the carrying amount of an asset or its CGU exceeds its estimated recoverable amount. Impairment losses are recognized in the statement of comprehensive loss. Impairment losses recognized in respect of CGU’s are allocated first to reduce the carrying amount of the other assets in the unit (group of units) on a pro rata basis.

       

An impairment loss in respect of other assets is assessed at each reporting date for any indications that the loss has decreased or no longer exists. An impairment loss is reversed if there has been a change in the estimates used to determine the recoverable amount. An impairment loss is reversed only to the extent that the asset’s carrying amount does not exceed the carrying amount that would have been determined, net of depletion and depreciation or amortization, if no impairment loss had been recognized.

13



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

3.

Significant Accounting Policies (continued)

       
(k)

Intangible assets

       
(i)

Patents and trademarks

       

Costs to obtain patents and trademarks are capitalized and are amortized to operations on a straight-line basis over the underlying term of the assets, which is 20 years, commencing upon the registration or acquisition of the patent or trademark.

       
(ii)

Investment in Technology

       

The investment in technology consists of consideration paid for the acquisition of the technology. Amortization commences with the successful commercial production or use of the product or process. These costs are being amortized over a period of four years from commencement of commercial use.

       
(iii)

Research and Development Costs

       

Research costs are charged to income when incurred.

       

Development costs are capitalized as intangible assets when the Company can demonstrate that the technical feasibility of the project has been established; the Company intends to complete the asset for use or sale and has the ability to do so; the asset can generate probable future economic benefits; the technical and financial resources are available to complete the development; and the Company can reliably measure the expenditure attributable to the intangible asset during its development. As of July, 2013, the Company has met the requirements for deferral of these expenses and has commenced capitalization of development costs incurred relating to its investment in technology. Amortization commences with the successful commercial production or use of the product or process. These costs are amortized over a period of four years from commencement of commercial use.

       

Investment Tax Credits ("ITCs") earned as a result of incurring Scientific Research and Experimental Development ("SRED") expenditures are recorded as a reduction of the related current period expense, the related deferred development costs or related capital assets. Management records ITC's when there is reasonable assurance of collection. To date, management has not recorded any amounts related to ITC’s.

       
(l)

Share capital – common shares

       

Common shares are classified as equity. Incremental costs directly attributable to the issue of common shares and share options are recognized as a deduction from equity, net of any tax effects.

14



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

3.

Significant Accounting Policies (continued)

     
(m)

Share based payments

     

The grant date fair value of options awarded to employees, directors, and service providers is measured using the Black-Scholes option pricing model and recognised in the statement of comprehensive loss, with corresponding increase in contributed surplus over the vesting period. A forfeiture rate is estimated on the grant date and is adjusted to reflect the actual number of options that vest. Upon exercise of the option, consideration received, together with the amount previously recognised in contributed surplus, is recorded as an increase to share capital.

     

Equity-settled share-based payment transactions with parties other than employees are measured at the fair value of the goods or services received, except where that fair value cannot be estimated reliably, in which case they are measured at the fair value of the equity instruments granted, measured at the date the entity obtains the goods or the counterparty renders the service.

     
(n)

Revenue

     

Revenue from sales of products is recognized when persuasive evidence of an arrangement exists, the price is fixed or determinable, collectability is reasonably assured and delivery has occurred. Under this policy, revenue on direct product sales is recognized upon shipment of products to customers. These customers are not entitled to any specific right of return or price protection, except for any defective product that may be returned under the Company's warranty policy. Generally, title and risk of loss transfer to the customer when the product leaves the Company's dock.

     

Warranty and Extended Services

     

The Company records a provision for estimated future warranty costs for both return-to-factory and on-site warranties. If future actual costs to repair were to differ significantly from estimates, the impact of these unforeseen costs or cost reductions would be recorded in subsequent periods. Separately priced extended warranties and service contracts are offered for sale to customers on all product lines. Extended warranty and service contract revenue is deferred and recognized as service revenue, over the period of the service agreement.

     
(o)

Finance income and expenses

     

Finance expenses comprise interest expense on borrowings, changes in the fair value of financial assets at fair value through profit or loss and impairment losses recognized on financial assets.

     

Interest income is recognised as it accrues in profit or loss, using the effective interest method.

     

Foreign currency gain and losses, reported under finance income and expenses, are reported on a net basis.

15



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

3.

Significant Accounting Policies (continued)

       
(p)

Income taxes

       

Income tax expense comprises current and deferred tax. Income tax expense is recognized in profit or loss except to the extent that it relates to items recognized directly in equity.

       

Current tax is the expected tax payable on the taxable income for the year, using tax rates enacted or substantively enacted at the reporting date, and any adjustment to tax payable in respect of previous years.

       

Deferred tax is recognized in respect of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for taxation purposes. Deferred tax is not recognised on the initial recognition of assets or liabilities in a transaction that is not a business combination. Deferred tax is measured at the tax rates that are expected to be applied to temporary differences when they reverse, based on the laws that have been enacted or substantively enacted by the reporting date. Deferred tax assets and liabilities are offset if there is a legally enforceable right to offset, and they relate to income taxes levied by the same tax authority on the same taxable entity, or on different tax entities, but they intend to settle current tax liabilities and assets on a net basis or their tax assets and liabilities will be realised simultaneously.

       
A deferred tax asset is recognized to the extent that it is probable that future taxable profits will be available against which they can be utilized. Deferred tax assets are reviewed at each reporting date and are reduced to the extent that it is no longer probable that the related tax benefit will be realised.
       
(q)

Loss per share

       

Basic earnings per share is calculated by dividing the profit or loss attributable to common shareholders of the Company by the weighted average number of common shares outstanding during the period. Diluted earnings per share is determined by adjusting the profit or loss attributable to common shareholders and the weighted average number of common shares outstanding for the effects of dilutive instruments such as options and warrants. The dilutive effect on earnings per share is recognised on the use of the proceeds that could be obtained upon exercise of options, warrants and similar instruments. It assumes that the proceeds would be used to purchase common shares at the average market price during the period. At year end, the effect of stock options, warrants and conversion feature on debt was anti-dilutive.

       
(r)

Provisions

       
A provision is recognized if, as a result of a past event, the Company has a present legal or constructive obligation that can be estimated reliably, and it is probable that an outflow of economic benefits will be required to settle the obligation. Provisions are determined by discounting the expected future cash flows at a pre-tax rate that reflects current market assessments of the time value of money and the risks specific to the liability. Provisions are not recognised for future operating losses.

16



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
3.

Significant Accounting Policies (continued)

       
  (s)

Contingent earn-out

       
  A contingent liability is a possible obligation that arises from past events and of which the existence will be confirmed only by the occurrence or non-occurrence of one or more uncertain future events not wholly within the control of the Company; or a present obligation that arises from past events (and therefore exists), but is not recognized because it is not probable that a transfer or use of assets, provision of services or any other transfer of economic benefits will be required to settle the obligation, or the amount of the obligation cannot be estimated reliably.
 
  (t)

Change in accounting policies

       
 

Certain pronouncements were issued by the IASB or the IFRIC that are mandatory for accounting periods after December 31, 2013. Many are not applicable to, or do not have a significant impact on, the Corporation and have been excluded.

       
 

(i)

IAS 32 – Financial Instruments
       
 

IAS 32 Financial Instruments: Presentation was amended by the IASB in December 2011. Offsetting Financial Assets and Financial Liabilities amendment addresses inconsistencies identified in applying some of the offsetting criteria. At January 1, 2014, the Company adopted this pronouncement and there was no material impact on the Company’s financial statements.

       
 

(ii)

IAS 36 – Impairment of Assets
       
 

IAS 36 Impairment of Assets was amended by the IASB in June 2013. Recoverable Amount Disclosures for Non-Financial Assets amendment modifies certain disclosure requirements about the recoverable amount of impaired assets if that amount is based on fair value less costs of disposal. The amendment is effective for annual periods beginning on or after January 1, 2014. Earlier application is permitted when the entity has already applied IFRS 13. At January 1, 2014, the Company adopted this pronouncement and there was no material impact on the Company’s financial statements.

17


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
3.

Significant Accounting Policies (continued)

       
(u)

Future accounting pronouncements

       

The accounting pronouncements detailed in this note have been issued but are not yet effective. The Company has not early adopted any of these standards and is currently evaluating the impact, if any, that these standards might have on its consolidated financial statements.

       
i)

IFRS 9 – Financial Instruments

       

IFRS 9 was issued by the IASB in October 2010 and will replace IAS 39 - Financial Instruments: Recognition and Measurement (“IAS 39”). IFRS 9 uses a single approach to determine whether a financial asset is measured at amortized cost or fair value, replacing the multiple rules in IAS 39. The approach in IFRS 9 is based on how an entity manages its financial instruments in the context of its business model and the contractual cash flow characteristics of the financial assets. Most of the requirements in IAS 39 for classification and measurement of financial liabilities were carried forward unchanged to IFRS 9. The new standard also requires a single impairment method to be used, replacing the multiple impairment methods in IAS 39.

       

The effective date of IFRS 9 was deferred to years beginning on or after January 1, 2018. Earlier application is permitted.

       
4.

Determination of Fair Value

       

A number of the Company’s accounting policies and disclosures require the determination of fair value, for both financial and non-financial assets and liabilities. Fair values have been determined for measurement and/or disclosure purposes based on the following methods. When applicable, further information about the assumptions made in determining fair values is disclosed in the notes specific to that asset or liability.

       
(a)

The fair value of cash and cash equivalents, investments and trade and other payables is estimated as the present value of future cash flows, discounted at the market rate of interest at the reporting date. At September 30, 2014 and December 31, 2013, the fair value of these balances approximated their carrying value due to their short term to maturity.

       
(b)

The fair value of stock options and warrants are measured using a Black-Scholes, option pricing model. Measurement inputs include share price on measurement date, exercise price of the instrument, expected volatility (based on weighted average historic volatility adjusted for changes expected due to publicly available information), weighted average expected life of the instruments (based on historical experience and general option and warrant holder behaviour) and the risk-free interest rate (based on government bonds).

       

The carrying value of amounts receivable, loans and trade and other payables included in the financial position approximate fair value due to the short term nature of those instruments.

18


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
4. Determination of Fair Value (continued)

The following tables provide fair value measurement information for financial assets and liabilities measured at fair value on the statement of financial position as of September 30, 2014 and December 31, 2013.

                  Fair value measurements using  
                  Quoted     Significant        
                  prices in     other     Significant  
                  Active     observable     unobservable  
  September 30,   Carrying           Market     inputs     inputs  
  2014   amount     Fair value     (Level 1)   (Level 2)   (Level 3)
  Financial assets                              
  Cash and cash equivalents $ 2,988,219   $ 2,988,219   $ 2,988,219   $  -   $  -  
  Investments $  188,824   $  188,824   $  188,824   $  -   $  -  
  Financial liabilities                              
  Derivative liability $  391,150   $  391,150   $  -   $  391,150   $  -  
  Contingent earn-out $ 4,084,834   $ 4,084,834   $  -   $  -   $  4,084,834  

                  Fair value measurements using  
                  Quoted     Significant        
                  prices in     other     Significant  
                  Active     observable     unobservable  
  December 31,   Carrying           Market     inputs     inputs  
  2013   amount     Fair value     (Level 1)     (Level 2)     (Level 3)
  Financial assets                              
  Cash and cash equivalents $ 5,550,788   $ 5,550,788   $ 5,550,788   $  -   $  -  
  Investments $  312,823   $  312,823   $  312,823   $  -   $  -  

Level 1 fair value measurements are based on unadjusted quoted market prices.

Level 2 fair value measurements are based on valuation models and techniques where the significant inputs are derived from quoted indices.

Level 3 fair value measurements are those with inputs for the asset or liability that are not based on observable market data.

19


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
4. Determination of Fair Value (continued)

The Company values financial instruments included in Level 3 on a quarterly basis. The significant unobservable inputs used in the fair value measurement of the Level 3 instruments as at September 30, 2014 are as follows:

Contingent earn-out

      March 21,     March 31,     June 30,     September  
      2014     2014     2014     30, 2014  
                           
                           
  Earn out revenue estimation $  12,500,000   $  12,500,000    $  12,500,000   $  12,500,000  
  Discount rate   35%     35%     35%     35%  
  Effect on condensed consolidated interim statement of comprehensive loss $

-

$

-

$

-

$

-

If the discount rate were changed to 30% or 40%, the fair value of the contingent earn-out would increase by $164,824 or decrease by $152,653 respectively. Management believes that reasonably possible changes to other unobservable inputs would not result in a significant change in the estimated fair value.

5. Prepaid and sundry assets

      September 30     December 31  
      2014     2013  
  Services and consulting prepayments and deposits $  314,441   $  85,334  
  Insurance costs   263,161     28,909  
  Facilities costs   15,016     9,422  
  Other   8,750     18,696  
    $  601,368   $  142,361  

6. Promissory Notes

On May 15, 2013, the Company agreed to loan Overland Storage Inc. (“Overland”) funds to support its working capital requirements. The loan bears interest at the Wall Street Journal published prime rate plus two percent per annum payable semi-annually in arrears on November 15 and May 15 of each year. The loan is secured by a Promissory Note, repayable on May 15, 2018, and a security agreement, dated May 15, 2014, providing subordinated collateral security over Overland’s inventory and holdings of common shares of Sphere 3D. (see note 18 – Subsequent Events)

20



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
7. Capital assets

  Cost   Computer     Furniture     Marketing &     Leaseholds     Total  
      Hardware     and     Web              
            Fixtures     Development              
                                 
  Balance at December 31, 2012 $  509,684   $  6,463   $  -   $  78,894   $  595,041  
  Additions   148,895     -     104,220     -     253,115  
  Disposals   -     -     -     -     -  
                                 
  Balance at December 31, 2013 $  658,579   $  6,463   $  104,220   $  78,894   $  848,156  
  Additions   453,500     32,046     15,096     5,534     506,176  
  Disposals   (4,056 )   -     -     -     (4,056 )
                                 
  Balance at September 30, 2014 $ 1,108,023   $  38,509   $  119,316   $  84,428   $  1,350,276  

  Accumulated Depreciation   Computer     Furniture     Marketing &     Leaseholds     Total  
      Hardware     and     Web              
            Fixtures     Development              
                                 
  Balance at December 31, 2012 $  215,091   $  949   $  -   $  20,874   $  236,914  
  Additions   183,977     1,293     21,075     15,778     222,123  
  Disposals   -     -     -     -     -  
                                 
  Balance at December 31, 2013 $  399,068   $  2,242   $  21,075   $  36,652   $  459,037  
  Additions   181,999     4,388     43,485     12,285     242,157  
  Disposals   (676 )   -     -     -     (676 )
                                 
  Balance at September 30, 2014 $  580,391   $  6,630   $  64,560   $  48,937   $  700,518  
                                 
                                 
  Net book value as at December 31, 2013 $  259,511   $  4,221   $  83,145   $  42,242   $  389,119  
                                 
  Net book value as at September 30, 2014 $  527,632   $  31,879   $  54,756   $  35,491   $  649,758  

21


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

8.

Intangible assets

     
(i)

Emulation and virtualization technology

     

On December 31, 2010, the Company acquired all rights and assets related to the emulation and virtualization technology from Promotion Depot Inc., in a non-arms length transaction, in exchange for 1,000,000 shares of the Company’s common stock. Since the fair value of the assets received are not readily determinable, the investment was valued based on the $695,000 fair value of the shares received by Promotion Depot Inc.

     

As of July 2013, the Company met the requirements for the deferral of development costs, under IFRS, and has commenced capitalizing the development costs incurred during the period. The technology acquired and developed achieved the beginning of commercial level of sales during the quarter ended June 30, 2014. As such, amortization of this asset commenced effective April 1, 2014.

     
(ii)

Virtual Desktop Implementation (“VDI”) technology

     

On March 21, 2014, the Company closed an Asset Purchase Agreement to acquire the VDI technology, including patents, trademarks and certain other intellectual property of V3 Systems, Inc.

     

At closing, the Company paid a purchase price of $11,829,505, in the form of USD$4M in cash and 1,089,867 shares of common stock.

     

In addition, the Company shall pay an earn-out (the “Earn-Out”), based on achieving certain milestones in revenue and gross margin, related to the VDI technology, of up to a further U.S. $5.0 million, payable at the discretion of Sphere 3D in cash or shares (up to a maximum of 1,051,414 common shares), to be priced at a 20-day weighted average price calculated at the time(s) the Earn-Out is realized. The Earn-Out is based on a sliding scale of revenue of the VDI technology (subject to minimum margin realization), subject to a maximum payment of U.S. $5.0 million upon earn-out revenue of U.S. $12.5 million. The Earn-Out was valued on a discounted cash flow basis using a discount rate of 35%.

     

The fair value of the consideration issued for the VDI technology is as follows:


  Cash consideration paid $  4,472,446  
  Cash consideration owing – current holdback   223,880  
  1,089,867 common shares valued at $6.545 per share   7,133,179  
  Fair value of Earn-Out   4,082,645  
         
  Total consideration   15,912,150  
         
  Cost of acquisition   145,502  
         
  Allocated to VDI technology $  16,057,652  

22



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

8.

Intangible assets (continued)

     
(iii)

Patents

     

During the year ended December 31, 2013, the Company filed 6 patents based on its technology, in addition to the 3 preliminary patents, filed on January 16, 2012, based on the technology acquired in the investment in technology.


      Emulation and                    
  Cost   virtualization     VDI              
      technology     technology     Patents     Total  
                           
                           
  Balance at December 31, 2012 $  695,000   $  -   $  25,000   $  720,000  
  Additions   885,250     -     67,571     952,821  
  Disposals   -     -     -     -  
  Balance at December 31, 2013   1,580,250     -     92,571     1,672,821  
  Additions   1,720,651     16,057,652     53,129     17,831,432  
  Disposals   -     -     -     -  
                           
  Balance at September 30, 2014 $  3,300,901   $  16,057,652   $  145,700   $ 19,504,253  

      Emulation and                    
  Accumulated amortization   virtualization     VDI              
      technology     technology     Patents     Total  
                           
                           
  Balance at December 31, 2012 $  -   $  -   $  1,250   $  1,250  
  Additions   -     -     3,492     3,492  
  Disposals   -     -     -     -  
  Balance at December 31, 2013 $  -   $  -   $  4,742   $  4,742  
  Additions   284,778     2,006,471     4,405     2,295,654  
  Disposals   -     -     -     -  
                           
  Balance at September 30, 2014 $  284,778   $ 2,006,471   $  9,147   $ 2,300,396  
                           
                           
  Net book value as at December 31, 2013 $  1,580,250   $  -   $  87,829   $  1,668,079  
                           
  Net book value as at September 30, 2014 $  3,016,123   $ 14,051,181   $  136,553   $ 17,203,857  

23


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

9. Trade and other payables

      September 30     December 31  
      2014     2013  
  Trade payables $  1,184,230   $  161,337  
  Non-trade payables and accrued expenses            
   Salaries and consulting   347,142     279,162  
   Legal and audit   335,721     37,783  
   Accrued warranty costs   226,016     -  
   Interest on debenture financing   110,667     -  
   Other   370,889     -  
    $  2,574,665   $  478,282  

10. Convertible debenture

On March 21, 2014, the Company issued a senior secured convertible debenture for USD$5,000,000. Simple interest is payable, in cash or stock, at the Company’s discretion, semi-annually at an annual rate of 8%. The note is convertible into common shares of the Company, at any time, at the option of the holders, at a conversion rate of USD$7.50 per share.

The Company has the option, up to March 21, 2015, and upon ten days’ notice, to repay the debenture at 120% of the outstanding principal and interest and the option, from March 21, 2015 to March 21, 2016, to repay the debenture at 125% of the outstanding principal and interest. In addition, the Company has the right to force the conversion of the debenture at any time that the weighted average price of the Company’s common stock for ten consecutive days has exceeded USD$11.25.

The note is secured by a general security interest in all of the assets of the Company. Any unconverted principal and accrued interest balance is payable at maturity, on March 21, 2018.

The debenture represents a hybrid instrument that needs to be bifurcated between its liability and derivative components. The derivative was calculated using the Black Scholes pricing model with the following inputs: (I) dividend yield of 0%; (II) expected volatility of 97%; (III) a risk free interest rate of 1.71% (IV) an expected life of 4 years; (V) an exercise price of $8.40 for the call and an exercise price of $12.60 for the put and (VI) a share price of $7.05. The residual was allocated to the debenture host contract portion.

As at September 30, 2014, the derivative was revalued using the Black Scholes pricing model with the following inputs: (I) dividend yield of 0%; (II) expected volatility of 97%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3.5 years; (V) an exercise price of $8.40 for the call and an exercise price of $12.60 for the put and (VI) a share price of $7.64 for a value of $391,150. The change in value of $65,631 has been recorded as an unrealized loss on derivative liability in the condensed consolidated statements of comprehensive loss.

24


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

10. Convertible debenture (continued)

The allocation of the liability and the derivative portion of the debenture as at September 30, 2014 are as follows:

      Debenture     Derivative     Total  
                     
  Balance as at December 31, 2013 $  -   $  -   $  -  
  Debenture proceeds   5,597,000     -     5,597,000  
  Derivative liability   (325,519 )   325,519     -  
  Cumulative gain on derivative liability   -     65,631     65,631  
  Accretion of debenture host contract   39,362     -     39,362  
  Currency translation adjustment   4,174     -     4,174  
                     
  Balance as at September 30, 2014 $  5,315,017   $  391,150   $  5,706,167  

11.

Share Capital

Authorized

 
  an unlimited number of common shares

  Issued and outstanding            
      Number        
      of Shares     Value  
               
  Balance, December 31, 2012   16,114,339   $  5,409,488  
               
  Issued for cash (net of cash fees of $441,178)   1,250,000     3,746,322  
  Less: Proceeds allocated to warrants         (775,000 )
                 Brokers warrants         (85,000 )
  Issued on exercise of warrants   2,784,840     3,844,720  
  Less: Warrants issued on exercise of broker warrants         (703,000 )
  Issued on exercise of options   180,001     148,251  
  Issued for future services   769,231     500,000  
               
  Balance, December 31, 2013   21,098,411   $  12,085,781  
               
  Issuance of common shares on acquisition of intangible assets (note 8)   1,089,867     7,133,179  
  Issued on exercise of warrants   1,195,257     2,470,616  
  Issued on exercise of options   196,250     163,489  
  Issued on satisfaction of debenture interest   10,894     113,298  
  Issued for future services (note 15(2))   52,801     496,329  
               
  Balance, September 30, 2014   23,643,480   $  22,462,692  

25


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

11. Share Capital (continued)

Escrowed shares

With the completion of the Transaction and the Company’s subsequent listing on the TSXV, certain common shares of the Company are subject to escrow in accordance with TSXV policies. There are two separate escrow agreements in place which are subject to different rates of release. The following table summarizes the common shares that were issued by the Company and are subject to and held under each escrow and the dates of release therefrom:

      Surplus Share     Value Share              
      Escrow     Escrow     Total  
      Number     %     Number     %     Number     %  
                                       
  Balance at December 21, 2012   4,655,000     100     4,306,253     100     8,961,253     100  
                                       
  Released - December 27, 2012(1)   232,750     5     430,625     10     663,375     7  
  Released - June 27, 2013   232,750     5     645,937     15     878,687     10  
  Released - December 27, 2013   465,500     10     645,937     15     1,111,437     13  
                                       
  Total subject to escrow at December 31, 2013   3,724,000     80     2,583,754     60     6,307,754     70  
                                       
  Released - June 27, 2014   465,500     10     645,937     15     1,111,437     13  
                                       
  Total subject to escrow at September 30, 2014   3,258,500     70     1,937,817     45     5,196,317     57  
                                       
  Future releases                                    
                                       
  December 27, 2014   698,250     15     645,939     15     1,344,189     15  
  June 27, 2015   698,250     15     645,939     15     1,344,189     15  
  December 27, 2015   1,862,000     40     645,939     15     2,507,939     27  
                                       
  Total future releases   3,258,500     70     1,937,817     45     5,196,317     57  

(1) Date of issuance of TSXV exchange bulletin announcing the commencement of trading of the Company’s stock.

Escrowed shares are subject to release every six months from the date of the exchange bulletin, at the rate shown. Release dates can change if the Company were to move to the TSX Tier 1 Exchange. As well, if the operations or development of the Intellectual Property or the business are discontinued then the unreleased securities held in the QT Escrow will be cancelled.

26


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

11.

Share Capital (continued)

     

Stock Options

     
i.

On February 5, 2014, the directors of the Company approved the award of 50,000 options, which vest in 4 equal quarterly amounts, exercisable for 10 years, with a value of $212,493. The fair value of the options issued was estimated at the date of grant using the Black-Scholes model with the following weighted average assumptions: (I) dividend yield of 0%; (II) expected volatility of 102.39%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3 years; (V) an exercise price of $6.54 and (VI) a share price of $6.54. Expected volatility was based on the Company’s historical stock price.

     
ii.

On April 18, 2014, the directors of the Company approved the award of 150,000 options, which vest in 4 equal quarterly amounts, exercisable for 10 years, with a value of $741,986. The fair value of the options issued was estimated at the date of grant using the Black-Scholes model with the following weighted average assumptions: (I) dividend yield of 0%; (II) expected volatility of 97.29%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3 years; (V) an exercise price of $8.10 and (VI) a share price of $8.10. Expected volatility was based on the Company’s historical stock price.

     
iii.

On April 23, 2014, the directors of the Company approved the award of 25,000 options, which vest in 4 equal quarterly amounts, exercisable for 10 years, with a value of $261,860. The fair value of the options issued was estimated at the date of grant using the Black-Scholes model with the following weighted average assumptions: (I) dividend yield of 0%; (II) expected volatility of 96.93%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3 years; (V) an exercise price of $8.60 and (VI) a share price of $8.60. Expected volatility was based on the Company’s historical stock price.

     
iv.

On May 27, 2014, at the annual and special meeting of the shareholders of the Company, the shareholders ratified an amendment to the fixed stock option plan, authorizing the award of up to 4,650,000 shares, being approximately 20% of the common shares outstanding at the record date for the meeting.

     
v.

On June 20, 2014, the directors of the Company approved the award of 350,000 options, of which 50,000 vest immediately and 300,000 vest in quarterly amounts over a three year period, exercisable for 10 years, with a value of $1,788,261. The fair value of the options issued was estimated at the date of grant using the Black-Scholes model with the following weighted average assumptions: (I) dividend yield of 0%; (II) expected volatility of 96.93%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3 years; (V) an exercise price of $8.39 and (VI) a share price of $8.39. Expected volatility was based on the Company’s historical stock price.

     
vi.

On June 23, 2014, the directors of the Company approved the award of 160,000 options, which vest in quarterly amounts over a three year period, exercisable for 10 years, with a value of $813,593. The fair value of the options issued was estimated at the date of grant using the Black-Scholes model with the following weighted average assumptions: (I) dividend yield of 0%; (II) expected volatility of 96.93%; (III) a risk free interest rate of 1.71% (IV) an expected life of 3 years; (V) an exercise price of $8.35 and (VI) a share price of $8.35. Expected volatility was based on the Company’s historical stock price.

27



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

11. Share Capital (continued)
   
  Stock Options (continued)
   
As at September 30, 2014 the Company had 928,749 additional options available for issuance. A continuity of the unexercised options to purchase common shares is as follows:

      Weighted average        
      exercise price     Number  
               
  Balance at December 31, 2012 $  0.83     1,015,000  
  Granted   1.24     2,295,001  
  Exercised   0.71     (180,001 )
  Expired   0.60     (320,000 )
               
  Outstanding at December 31, 2013 $  1.18     2,810,000  
  Granted   8.21     735,000  
  Exercised   0.35     (196,250 )
  Expired   2.68     (3,750 )
               
  Outstanding at September 30, 2014 $  2.75     3,345,000  

The weighted average share price on the date of exercise was $8.71 (December 31, 2013 -$3.69) .

The following table provides further information on the outstanding options as at September 30, 2014:

  Expiry Date Number
exercisable
Number
outstanding
Weighted average
exercise price
Weighted average
years remaining
  March 4, 2018 100,000 100,000 $ 0.85 3.43
  July 3, 2018 50,000 50,000 0.65 3.76
  January 16, 2022 640,000 640,000 0.83 7.30
  September 19, 2022 266,667 300,000 0.85 7.98
  April 16, 2023 75,000 75,000 0.85 8.55
  July 2, 2023 283,332 850,000 0.65 8.76
  August 29, 2023 100,000 100,000 2.50 8.92
  September 15, 2023 445,000 445,000 2.68 8.96
  October 31, 2023 37,500 50,000 4.28 9.09
  February 4, 2024 25,000 50,000 6.70 9.34
  April 18, 2024 37,500 150,000 8.10 9.55
  April 23, 2024 6,250 25,000 8.60 9.56
  June 20, 2024 75,000 350,000 8.39 9.73
  June 23, 2024 13,333 160,000 8.35 9.73
           
    2,154,582 3,345,000 $ 2.75 8.41

28


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

11. Share Capital (continued)
   
  Warrants
   
  The Company had the following warrants outstanding:

                  Weighted Average  
            Number of     Exercise  
            Warrants     Price  
                     
  Outstanding at December 31, 2012     4,262,442   $  0.98  
                     
  Exercised –   Broker Warrants     (152,528 )   0.70  
      Investor Warrants     (1,980,462 )   1.00  
      Broker Unit Warrants     (325,925 )   0.85  
                     
  Issued on exercise of Broker Unit Warrants     325,925     1.00  
  Exercise of warrants issued     (325,925 )   1.00  
                     
  Granted –   Investor Warrants     625,000     4.50  
      Broker Unit Warrants     100,000     3.35  
                     
  Outstanding at December 31, 2013     2,528,527   $  1.96  
                     
  Exercised –   Broker Unit Warrants     (100,000 )   3.35  
      Investor Warrants     (1,095,257 )   1.54  
  Granted –   Investor Warrants     50,000     4.50  
                     
  Outstanding at September 30, 2014     1,383,270     2.28  

The weighted average share price on the dates of exercise was $7.06 (December 31, 2013 -$3.46) .

29



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)
   
12. Other Equity
      September 30,     December 31,  
      2014     2013  
               
  Other equity beginning of period $  1,715,151   $  1,007,500  
  Issuance of special warrants net of costs(1)   9,072,526     -  
  Value of warrants issued   -     1,563,000  
  Stock based compensation   2,415,622     319,679  
  Value of warrants exercised   (443,733 )   (1,154,528 )
  Value of options exercised   (30,389 )   (20,500 )
               
  Other equity end of period $  12,729,177   $  1,715,151  

  (1)

On June 5, 2014, the Company closed an underwritten financing for the sale of 1,176,500 Special Warrants of the Company at a price of $8.50 per Special Warrant for gross proceeds of $10,000,250.

     
 

Each Special Warrant, upon exercise or deemed exercise, will convert into one unit of the Company (a "Unit") with each Unit being comprised of one common share of the Company (a "Common Share") and one-half of a Common Share purchase warrant of the Company (a "Warrant"). There is no additional cost to exercise a Special Warrant. Each whole Warrant is exercisable at an exercise price of $11.50 per share for a period of two years from the closing date. All securities are subject to a four-month hold period from the issuance date. The Company intended to file a short form prospectus (the "Final Prospectus") in each of the Provinces of British Columbia and Ontario (collectively, the "Offering Jurisdictions") qualifying the Units issuable upon exercise or deemed exercise of the Special Warrants by July 31, 2014, failing which the holder would be entitled to receive 1.05 Units upon exercise or deemed exercise of the Special Warrants. The Company was informed by the Ontario Security Commission (“OSC”) that, due to the fact that (i) the short form prospectus, issued in connection to the Special Warrants, is the first prospectus filing by the Company post-Qualifying Transaction, and (ii) the materiality of the transaction with Overland, the OSC has taken the position that it will be reviewed under the long-form prospectus timing guidelines, as such, the Company was unable to file the final Prospectus by July 31, 2014, meaning that the Special Warrants will be convertible to 1.05 units per Special Warrant upon the filing of the final Prospectus. Any unexercised Special Warrants will be deemed to be automatically exercised on the earlier of: (i) the third business day following the day on which a final receipt is issued in the Offering Jurisdictions for the Final Prospectus qualifying the distribution of the Units; and (ii) October 6, 2014 (see note 18 – Subsequent Events).

     
 

The Company incurred fees and commissions to September 30, 2014 in the amount of $927,724 related to this financing.

30



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

13. Finance expenses

      Three months ended     Nine months ended  
      September 30,     September 30,  
      2014     2013     2014     2013  
                           
  Interest income $  (94,485 ) $  -   $  (122,635 ) $  (1,685 )
  Interest expense   126,050     655     272,450     1,993  
  Foreign exchange gain   (35,741 )   -     (153,015 )   -  
  Unrealized (gain) / loss on derivative liability   (98,513 )   -     65,631     -  
  Investment holding loss   70,906     26,350     56,924     26,350  
                           
    $  (31,783 ) $  27,005   $  119,355   $  26,658  

14. Related Party Transactions

Related parties of the Company include the Company’s key management personnel and independent directors.

Key management personnel are those persons having authority and responsibility for planning, directing and controlling the activities of the Company, directly or indirectly, including any director (whether executive or otherwise).

The compensation paid or payable to key management personnel is shown below:

      September 30     September 30  
      2014     2013  
  Salaries, management fees and benefits $  403,750   $  440,000  
  Share-based payments - management   207,314     38,365  
  Share-based payments - directors   214,871     81,656  
    $  825,935   $  560,021  

Legal services of $365,200 (2013 - $74,076) were provided by a legal firm affiliated with a director of the Company. Professional services of $25,000 (2013 - $NIL) were provided by a company controlled by a director of the Company.

Amounts owing to a legal firm affiliated with a director of the Company and officers and directors of the Company at period end included in trade and other payables total $211,439 (2013 - $13,265).

31



Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

15.

Commitment and Contingencies

     
1)

Merger Agreement

     

On May 15, 2014, the Company entered into a definitive merger agreement (the “Merger Agreement”) with Overland, pursuant to which Overland and a wholly-owned subsidiary of Sphere 3D would combine (the “Transaction”). After completion of the Transaction, it is expected that current holders of Overland securities will own approximately 28.8% of Sphere 3D, on a fully diluted basis, as a result of their exchange of securities in the Transaction.

     

Under the terms of the Merger Agreement, the Company will issue a total of 9,443,882 common shares (“Common Shares”) on closing, subject to adjustment, for all of the outstanding share capital of Overland (“Overland Shares”) on the basis of one Overland Share for 0.510594 Common Shares of Sphere 3D (the “Exchange Ratio”) (see note 18 – Subsequent Events). In addition, Sphere 3D will issue up to 1,467,906 warrants, 143,325 options and 505,321 restricted share units, or equivalents, in exchange for the outstanding convertible securities of Overland at the closing date, calculated on the basis of the Exchange Ratio. All issued and outstanding stock appreciation rights of Overland will terminate on closing. The average exercise price of the options and warrants are US$22.62 and US$17.28, respectively. At current pricing, the Company believes it is unlikely that any of these options and warrants will be exercised.

     

On May 14, 2014, the last trading day prior to the announcement of the transaction, the closing price of the Overland Shares, on the NASDAQ, was US$2.90 and the closing price of the Common Shares of Sphere 3D, on the TSX Venture Exchange (the “TSXV”), was C$9.46 (or US$8.68). Based on the closing price of the Common Shares of Sphere 3D on May 14, 2014, the total consideration payable to holders of Overland shareholders has an implied value of approximately US$81.97 million or approximately US$4.43 per Overland Share.

     
2)

Supplier Agreement

     

On July 15, 2013, the Company entered into a supplier agreement with Overland Storage, Inc., under which the Company has agreed to pay for up to $1.5 million of cloud infrastructure equipment purchases from Overland in the form of common shares in the capital of the Company (the “Common Shares”) as follows: (i) 769,231 Common Shares at a fair value of $0.65 per share, having a value of $500,000 were issued on Closing; and (ii) 52,801 Common Shares, at a fair value of $10.11 per share based on the 10 trading day average of the closing price per share of Common Shares ending 3 trading days prior to the anniversary date of the Supplier Agreement, having a value of $500,000 US were issued on the second anniversary date of the Supplier Agreement and; (iii) that number of Common Shares equal to $500,000 divided by the 10 trading day average of the closing price per share of Common Shares ending 3 trading days prior to each of the second year anniversary date of the Supply Agreement, to a maximum of 769,231 Common Shares having a value of $500,000. Such Sphere 3D shares are subject to a four months and one day hold period from the date of issuance in accordance with applicable Canadian securities laws.

32


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

15.

Commitment and Contingencies (continued)

     
  3)

Operating Lease

The Company entered into a five year lease, for a 6,000 square foot, free standing building, on May 1, 2011. In addition to the minimum lease payments, the Company is required to pay operating costs estimated at $27,000 per year. The minimum lease payments for the Company’s facility in Mississauga, are as follows:

  2014 $  14,500  
  2015   59,500  
  2016   20,000  

  4)

Legal Matters

     
 

The Company has been named as a defendant in actions that arose as a result of the announcement of the agreement to merge with Overland Storage, Inc. With respect to these matters, based on the management’s current knowledge, the Company believes that the amount or range of reasonable possible loss, if any, will not, either individually or in the aggregate, have a material adverse effect on the Company’s business, consolidated financial position, results of operations or cash flows. (see note 18 – Subsequent Events)


16.

Capital Risk Management

       

The Company is not subject to externally imposed capital requirements and there has been no change with respect to the overall capital risk management strategy during the period ended September 30, 2014 and year ended December 31, 2013.

       
17.

Financial Risk Management

       

The Company is exposed to a variety of financial risks by virtue of its activities: market risk (including currency risk and interest rate risk), credit risk and liquidity risk. The overall risk management program focuses on the unpredictability of financial markets and seeks to minimize potential adverse effects on financial performance.

       

Risk management is carried out by management under policies approved by the Board of Directors. Management is charged with the responsibility of establishing controls and procedures to ensure that financial risks are mitigated in accordance with the approved policies.

       
(a)

Market risk

       
(i)

Currency risk:

       

The Company is still in its pre-commercialization phase and as such has limited exposure to foreign exchange risk. Foreign exchange risk arises from purchase transactions as well as recognized financial assets and liabilities denominated in foreign currencies.

33


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

17.

Financial Risk Management (continued)

       
(a)

Market risk (continued)

       
(ii)

Interest rate risk:

       

Interest rate risk is the risk that the future cash flows of a financial instrument will fluctuate because of changes in market interest rates.

       

Financial assets and financial liabilities with variable interest rates expose the Company to cash flow interest rate risk. The convertible debenture is at a fixed rate. The Company's cash and cash equivalents and investments earn interest at market rates.

       

The Company manages its interest rate risk by maximizing the interest income earned on excess funds while maintaining the liquidity necessary to conduct operations on a day-to-day basis. Fluctuations in market rates of interest do not have a significant impact on the Company’s results of operations as interest expense represents approximately 0.1% (2012 – 0.7%) of total expenses. A 1.0% change in interest rates would not have a significant impact on the interest income.

       
(b)

Credit risk

       

The Company is subject to risk of non-payment of amounts receivable. The Company mitigates this risk by monitoring the credit worthiness of its customers.

       
(c)

Liquidity risk

       

Liquidity risk is the risk that the Company will not be able to meet its obligations as they fall due. The Company manages its liquidity risk by forecasting cash flows from operations and anticipated investing and financing activities. Senior management is also actively involved in the review and approval of planned expenditures.

       

As at September 30, 2014, the Company has trade and other payables of $2,287,692 (December 31, 2013 - $478,282) due within 12 months and has cash and cash equivalents of $2,988,219 (December 31, 2013 - $5,550,788) to meet its current obligations.

34


Sphere 3D Corporation.
Notes to the Condensed Consolidated Interim Financial Statements
September 30, 2014 and 2013
(Expressed in Canadian Dollars)

18.

Subsequent Events

     
a)

On October 6, 2014 the Company issued 1,235,325 common shares of the Company and 617,663 common share purchase warrants of the Company upon exercise of 1,176,500 special warrants. Each common share purchase warrant is exercisable at an exercise price of $11.50 per share for a period of two years from June 5, 2014.

     
b)

On October 14, 2014, the Company and Overland executed an amendment to the Agreement and Plan of Merger Agreement dated May 15, 2014 (the "Merger Agreement") to reduce the exchange ratio from 0.510594 common shares of the Company for each share of Overland common stock to 0.46385 common shares of the Company for each share of Overland common stock.

     
c)

On October 17, 2014 the Company received a partial repayment of the Promissory Note in the amount of US $2.5 Million. Under the terms of the repayment, the Company has committed to convert an equivalent amount of the Overland debt into common shares of the Company immediately following closing of the Merger Agreement. The debt will be converted into 333,333 shares of common stock of the Company, at a price of $7.50 US.

     
d)

Overland has entered into a Memorandum of Understanding with the Plaintiffs in the consolidated class action cases, referred to as "In re Overland Storage Inc., Shareholders Litigation" in the Company’s registration statement filed with the Securities Exchange Commission on form F-4/A, that would, subject to court approval and other standard conditions, provide for the settlement of all outstanding claims in regard to Overland's proposed merger transaction with the Company.

     
e)

On November 28, 2014, the Shareholders of Overland Storage, Inc. voted in favor of the Merger Agreement and, as such, the Company expects that the transaction will be closed in the first week of December.

35


Sphere 3D Corporation: Exhibit 99.2 - Filed by newsfilecorp.com

MANAGEMENT DISCUSSION & ANALYSIS

Ontario Securities Commission FORM 51-102F1

ISSUER DETAILS
 

FOR QUARTER ENDED

September 30, 2014

   

DATE OF REPORT

December 1, 2014

   

NAME OF ISSUER

Sphere 3D Corporation

   

ISSUER ADDRESS

240 Matheson Blvd. East

 

Mississauga, ON L4Z 1X1

   

ISSUER TELEPHONE NUMBER

(416) 749-5999

   

CONTACT PERSON

Peter Tassiopoulos

CONTACT POSITION

CEO

CONTACT TELEPHONE NUMBER

(416) 749-5999

CONTACT EMAIL ADDRESS

peter.tassiopoulos@sphere3d.com

   

WEB SITE ADDRESS

www.sphere3d.com



FORM 51-102F1

SPHERE 3D CORPORATION

MANAGEMENT’S DISCUSSION AND ANALYSIS
FOR THE THREE AND NINE MONTHS ENDED SEPTEMBER 30, 2014

Sphere 3D Corporation is a virtualization technology solution provider. Sphere 3D's Glassware 2.0™ platform delivers virtualization of many of the most demanding applications in the marketplace today; making it easy to move applications from a physical PC or workstation to a virtual environment either on premise and/or from the cloud. Sphere 3D’s V3 Systems division supplies the industry’s first purpose built appliance for virtualization as well as the Desktop Cloud Orchestrator management software for Converged Infrastructure.

This Management’s Discussion and Analysis includes the financial results of the Company, its wholly-owned subsidiaries, V3 Systems Holding, Inc., which was incorporated in the State of Delaware on January 14, 2014, S3D Acquisition Company, which was incorporated in the State of California on May 14, 2014, Sphere 3D Inc., which was incorporated under the Canada Business Corporation Act on October 20, 2009, and its wholly owned subsidiary, Frostcat Technologies Inc., which was incorporated under the Business Corporations Act (Ontario) on February 13, 2012.

The Company was incorporated under the Business Corporations Act (Ontario) on May 2, 2007 and is listed on the TSXV and the NASDAQ Global Market, under the trading symbol “ANY”. The Company has its main and registered office at 240 Matheson Blvd. East, Mississauga, Ontario, L4Z 1X1.

ADVISORY

This Management’s Discussion and Analysis (“MD&A”) comments on the financial condition and operations of Sphere 3D Corporation (“Sphere 3D” or the “Company”), for the three and nine months ended September 30, 2014 and updates our MD&A for fiscal 2013. The information contained herein should be read in conjunction with the Consolidated Financial Statements and Auditor’s Report for fiscal 2013 and the unaudited Condensed Consolidated Financial Statements for the three and nine months ended September 30, 2014.

The Company prepares its condensed consolidated financial statements in accordance with International Financial Reporting Standards (“IFRS”) as set out in the Handbook of The Canadian Institute of Chartered Accountants (“CICA Handbook”). In 2010, the CICA Handbook was revised to incorporate IFRS, and requires publicly accountable enterprises to apply such standards effective for years beginning on or after January 1, 2011. Accordingly, the Company has reported on this basis in these condensed consolidated financial statements. All financial information contained in this MD&A and in the unaudited condensed consolidated financial statements has been prepared in accordance with International Financial Reporting Standards (“IFRS”).

The quarterly unaudited consolidated financial statements and this MD&A have been reviewed by the Company’s Audit Committee and approved by its Board of Directors on November 28, 2014.


FORWARD LOOKING INFORMATION

Certain statements in this MD&A constitute forward-looking statements that involve risks and uncertainties. Forward-looking statements, without limitation, may contain the words believes, expects, anticipates, estimates, intends, plans, or similar expressions. Forward-looking statements are not guarantees of future performance. They involve risks, uncertainties and assumptions and Sphere 3D’s actual results could differ materially from those anticipated. Forward looking statements are based on the opinions and estimates of management at the date the statements are made, and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. In the context of any forward-looking information please refer to risk factors detailed herein, as well as other information contained in the company’s filings with Canadian securities regulators (www.sedar.com).

ADDITIONAL INFORMATION

Additional information relating to the Company is available on SEDAR at www.sedar.com and on the Company’s web-site at www.sphere3d.com.

GENERAL DEVELOPMENT OF THE BUSINESS

Sphere 3D is a technology company that delivers an application virtualization platform aimed at extending the life of software indefinitely. The Company’s technology enhances the user experience of both legacy and current applications and empowers users to gain access to these applications from devices of their choosing.

Over the last five years, Sphere 3D has designed a proprietary platform, namely Glassware 2.0™, for the delivery of applications from a server-based computing architecture.

Through the creation of Glassware 2.0, software is made available from a central location irrespective of the device that is accessing the software. Legacy software can be run using Glassware 2.0 even if the operating system and the machine upon which it is run on is no longer sold or supported. Software publishers who invest millions of dollars to write software code can be assured that their software can be utilized for as long as it is required. With Glassware 2.0, new software released by publishers will be driven by new feature sets rather than the next release of the original OS upon which the software was written.

The Company has taken a unique approach in that it has built its technology platform without the use of a hypervisor and instead has designed its own microvisor. This required the Company to design Glassware 2.0 without resorting to layers of OS programming code. With the removal of the OS, Glassware 2.0 did not connect to hardware so additional code was written to access that hardware directly. Glassware 2.0 has a series of different emulators within its design so that any device can access a wide array of applications that sit on top of Glassware 2.0. This process is fundamentally different from other software that approximates the feature sets which management believes results in a quantum leap in functionality and a significant decrease in cost.

One of the additional benefits of this approach is the ability to deliver multiple application sessions on either a single server or through clusters of servers without the requirement to deliver complete VDI. Through Glassware 2.0™, the process for “porting” and “publishing” applications is streamlined to the point that it is practically automated, requiring very little administration input.


The Company’s technology eliminates the complexity associated with planning, implementation, licensing and support of virtualization and Cloud migration while expanding the ecosystem of applications available to users. Additionally, Glassware 2.0™ architecture and unique “application only” virtualization, coupled with complementary VDI technology of V3 Systems (as described below), enables the Company and its partners to deliver flexibility within the industry and a wide array of deployment options.

Since inception, the Company has invested the majority of its capital in the design, development and testing of its technology, with the majority of employees and financial resources allocated to such functions. In 2013, the Company started to transition its focus from entirely a research and design organization to a commercial enterprise, through an increased investment in sales and marketing resources. In 2014 the company successfully started to generate revenue from the sale of its products.

New Product Introductions

The third quarter has further increased the Company’s product and solutions offerings with:

Continued Innovation

Sphere 3D continues on its quest to redefine the boundaries of hardware through its “software defined everything” approach to computing. DLA Piper, on behalf of the Company, filed a provisional patent for the first microvisor runtime environment available on a chip. The latest IP creation is a culmination of years of miniaturization work with the intent of making Glassware 2.0 completely portable and available offline.

Glassware 2.0 has seen its architecture streamlined and gain efficiency continuously since the first iteration that required 8 individual hardware servers in 2010, to its current production state of availability on a single appliance.

The most recent progress of the Glassware 2.0 single chip architecture allowed Sphere 3D to showcase Glassware 2.0 server technology running on a single laptop for attendees at BriForum in London England, and Boston, as well as at VM World in San Francisco.


Corporate Highlights

Merger Agreement with Overland

On May 16th, 2014, the Company announced that it had entered into a definitive agreement to acquire Overland Storage, Inc. (NASDAQ:OVRL). Overland is a trusted global provider of unified data management and data protection solutions designed to enable small and medium enterprises, distributed enterprises, and small and medium businesses to anticipate and respond to data storage requirements.

Overland provides an integrated range of technologies and services for primary, nearline, offline, and archival data storage, and makes it easy and cost effective to manage different tiers of information over time, whether distributed data is across the hall or across the globe.

Overland SnapServer, RDX removable disk-based technology, SnapScale, SnapServer, SnapSAN, NEO Series and REO Series solutions are available through a channel of over 17,000 resellers, multiple distributers and OEMs in over 70 countries.

On November 28th, 2014, over 99% of Overland Shareholders, who voted at a special meeting of shareholders held in San Jose California, approved the merger with Sphere 3D. It is anticipated the transaction will close the first week of December 2014.

Filing of SEC Form 40-F and F-4

On June 27, 2014, Sphere 3D announced that is has filed with the SEC a registration statement on Form 40-F to register the Common Shares under Section 12 of the U.S. Securities and Exchange Act of 1934, as amended. The Form 40-F entitles eligible Canadian issuers to register securities with the SEC pursuant to Section 12 of the U.S. Securities Exchange Act of 1934.

On July 23, 2014, Sphere 3D filed a registration statement, on form F-4, which serves as the proxy statement/prospectus for the acquisition of Overland Storage Inc. On November 7, 2014, the SEC issued its notice of effectiveness for the registration statement, as amended.

Future Developments

Sphere 3D intends to continue to build its organization with a focus on revenue generation, marketing and a continuation of its aggressive technology innovation cycle.


Upon completion of the merger with Overland Storage, the Company will have completed the assembly of an end to end technology stack for business of all sizes:

To support its marketing strategy, Sphere 3D intends to continue to increase its service delivery capacity within the scalable model it has already established, and add selective technology functionality to its platform to enhance specific vertical and/or client offerings.

With the announcement of the Merger Agreement, Sphere 3D and Overland have accelerated their efforts to develop an integrated application virtualization and data storage platform, as well as Converged Infrastructure solutions. It is expected that the combined businesses will accelerate Sphere 3D’s go to market strategy and allow it to leverage Overland’s robust third party reseller and OEM distribution model.

DESCRIPTION OF THE BUSINESS

All of the Company’s product development, sales, and marketing operations were conducted from its offices in Mississauga, Ontario, Canada, and since the first quarter of 2014, from various sales offices in the United States.

Market Overview

The market for the Company’s products and services has experienced strong demand and management anticipates that such demand will continue for the foreseeable future.

According to IHS Technology, enterprise businesses moving their IT services, applications and infrastructure to cloud-based architecture will cause market revenue in this segment to surge by a factor of three from 2011 to 2017.1

 

_______________________________
1
IHS: Cloud- Related Spending by Businesses to Triple from 2011 to 2017 – February 4, 2014.


IHS reports “Global business spending for infrastructure and services related to the cloud will reach an estimated $174.2 billion (in 2014), up a hefty 20 percent from $145.2 billion in 2013. By 2017, enterprise spending on the cloud will amount to a projected $235.1 billion, triple the $78.2 billion in 2011.

Within the Cloud market, IDC is predicting that the cloud software market will surpass $75 billion by 2017 attaining a five year compound annual growth rate of 22% in the forecast period2 and according to Gartner, SaaS and cloud-based business application services revenue will grow from $13.5 billion in 2011 to $32.8 billion in 2016, at a compound annual growth rate of 19.5% .3

Wikibon’s research projects rapid market growth for Converged Infrastructure, expecting the total available market to reach $402 billion by 2017 of which $217 billion is comprised of Server, Storage, Networking and Infrastructure Software.

Additional research from IDC anticipates the overall spending on converged systems in the data center to grow at a compound annual growth rate (CAGR) of 54.7 percent, from $2.0 billion in 2011 to $17.8 billion in 2016 and that converged infrastructure will account for 12.8 percent of total storage, server, networking and software spending by 2016, up from only 3.9 percent in 2012.

Over the next 12 months, two additional significant trends are expected to benefit the Company: (i) within the next 12 months more than 50% of enterprises will prioritize building private internal Clouds (currently, the common approach that companies are using is by purchasing commercial software),4 and (ii) Cloud applications will account for 90% of total mobile data traffic by 2018 while Mobile cloud traffic will grow 12-fold from 2013 to 2018, attaining a compound annual growth rate of 64%.5

Sales and Marketing

The Company intends to focus the majority of sales efforts through an indirect sales channel in order to achieve the greatest possible impact with the least possible start-up costs. This indirect channel includes licensees, resellers, ISVs, OEMs and systems integrators. The Company has access through Overland to a global base of distributers, resellers, ISVs and OEMs.

The Company’s software is delivered through both a SaaS model, with maintenance to end-user customers included and under a perpetual license; if software is sold as a perpetual license, the Company will require end-user customers to purchase maintenance contracts when they purchase software.

In establishing prices for the Company’s products, the Company considers the value of the products and solutions in comparison to other industry virtualization and hardware solutions and strives to deliver the lowest total cost of ownership where possible.

Competitive Conditions

Management believes that many of Sphere 3D’s proprietary technologies have designs and architectures that are unique and innovative. While some of our competitors appear to have similar product offerings, management believes that Sphere 3D’s products represent a significant advance in terms of functionality and usability.

 

_______________________________
2
IDC infographic sponsored by Cisco.
3
Gartner Forecast Analysis: Enterprise Application Software, Worldwide, 2011-2016, 4Q12 Update, January 2013.
4
The Forrester Wave™: Private Cloud Solutions, Q4 2013 by Lauren E. Nelson, November 25, 2013.
5
Cisco Visual Networking Index: Global Mobile Data Traffic Forecast Update, 2013–2018. Source: FORBES, Roundup of Cloud Computing Forecasts And Market Estimates, 2014.


Proprietary Protection

Sphere 3D has designed and maintains its virtualization platform, converged infrastructure technology, and related software. The Company will be relying on a combination of patents, trademarks, trade secret and copyright laws, as well as contractual restrictions, to protect the proprietary aspects of its products and services. Although every effort is made to protect Sphere 3D’s intellectual property, these legal protections may only afford limited protection. Sphere 3D intends to continue to selectively pursue patenting of further technology developed in the future.

Sphere 3D may continue to file for patents regarding aspects of its platform, services and delivery method at a later date depending on the costs and timing associated with such filings. The Company may make investments to further strengthen its copyright protection going forward, although no assurances can be given that it will be successful in such patent and trademark protection endeavours. Sphere 3D seeks to limit disclosure of its intellectual property by requiring employees, consultants, and partners with access to its proprietary platform and information to execute confidentiality agreements and non-competition agreements and by restricting access to Sphere 3D proprietary information. Due to rapid technological change, Sphere 3D believes that factors such as the expertise and technological and creative skills of our personnel, new services and enhancements to our existing services are more important to establish and maintain an industry and technology advantage than other available legal protections.

Despite Sphere 3D’s efforts to protect its proprietary rights, unauthorized parties may attempt to copy aspects of its services or to obtain and use information that Sphere 3D regards as proprietary. The laws of many countries do not protect proprietary rights to the same extent as the laws of the United States or Canada. Litigation may be necessary in the future to enforce Sphere 3D’s intellectual property rights, to protect Sphere 3D’s trade secrets, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement. Any such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on Sphere 3D’s business, operating results and financial condition. There can be no assurance that Sphere 3D’s means of protecting its proprietary rights will be adequate or that our competitors will not independently develop similar services or products. Any failure by Sphere 3D to adequately protect its intellectual property could have a material adverse effect on its business, operating results and financial condition.

SEGEMENTED INFORMATION

The Company’s product development, sales, and marketing operations are conducted from its offices in North America. The Company’s operations focus on one market segment, Cloud Computing and Virtualization, including the development, and sale of Sphere 3D’s “Glassware 2.0™” virtualization platform, the V3 Desktop Cloud Orchestrator ™ management software and Hyper-Converged Infrastructure.


SELECTED CONSOLIDATED FINANCIAL INFORMATION AND MANAGEMENT'S DISCUSSION AND ANALYSIS

Periods Ended September 30, 2014 and 2013

Adjusted EBITDA

The following table reconciles Adjusted EBITDA to Net profit (loss). This information is taken from and should be read in conjunction with Sphere 3D's financial statements and related notes:

    Three Months ended     Nine Months ended  
    September 30,     September 30,  

In thousands (except per share)

  2014     2013     2014     2013  

 

  (unaudited)     (unaudited)     (unaudited)     (unaudited)  

Revenue

$  1,616   $  -   $  4,372   $  -  

Cost of Sales

  873     -     2,147     -  

Gross Margin

  743     -     2,225     -  

Gross margin percent

  46.0%     -     50.9%     -  

Net comprehensive loss for the period

  (3,753 )   (469 )   (7,150 )   (1,678 )

Loss per share

$  (0.16 ) $  (0.03 ) $  (0.31 ) $  (0.10 )

Add back

                       

       Stock based compensation

  869     54     2,053     101  

       Amortization of intangibles

  1,147     1     2,296     3  

       Amortization of property and equipment

77 50 241 146

       Financial expenses

  (32 )   27     119     27  

       Merger agreement costs

  579     -     935     -  

Total

  2,640     132     5,644     277  

Adjusted EBIDA

$  (1,113 ) $  (337 ) $  (1,506 ) $  (1,401 )

Adjusted EBITDA

The term Adjusted EBITDA refers to Profit before deducting share-based payment expense, finance expense, foreign exchange gain (loss), non-cash loss (gain) on fair market value of financial instruments, depreciation and income taxes. We believe that Adjusted EBITDA provides useful supplemental information as an indication of the results generated by the Company’s main business activities prior to taking into consideration how those activities are financed and taxed and also prior to taking into consideration share-based payment expense and the other items listed above. Accordingly, we believe that these measures may also be useful to investors in enhancing their understanding of the Company’s operating performance.


AS AT   September 30     December 31  
(in thousands)   2014     2013  
    (unaudited)     (audited)  
Current assets $  7,841   $  6,839  
Non-current assets   26,859     2,057  
Total assets $  34,700   $  8,896  
Current liabilities $  6,840   $  983  
Non-current liabilities   5,706     -  
Total liabilities $  12,546   $  983  
Total equity $  22,154   $  7,913  

Sphere 3D has not declared any dividends since its incorporation. Sphere 3D does not anticipate paying cash dividends in the foreseeable future on its Sphere 3D Shares, but intends to retain future earnings to finance internal growth, acquisitions and development of its business. Any future determination to pay cash dividends will be at the discretion of the board of directors of Sphere 3D and will depend upon Sphere 3D's financial condition, results of operations, capital requirements and such other factors as the board of directors of Sphere 3D deems relevant.

Results of Operations (in thousands except per share information)

Revenue

The Company generates and analyzes sales from the following segments:

  1.

Hardware and Software Products. A suite of emulation products, which includes Sphere 3D’s Glassware 2.0™ application virtualization platform products and its VDI appliances, including software that powers the Sphere 3D hardware and enables network operators to remotely control and monitor the appliances in their network. The Company also provides hardware and software from other companies (3rd Party Products) when required to complete an end-to-end network solution.

     
  2.

License fees – License fees include the charges for the right to use both Sphere 3D and 3rd Party Software products, as well as exclusivity and special use licenses.

     
  3.

Professional Services & Maintenance and Support. Professional services and support typically include installation, project management and training, as well as basic and extended warranty and online support. These services can be provided by Sphere 3D or by third party companies who work for Sphere 3D. Support

With first sales of the Company’s Glassware 2.0 technology, V3 appliances and DCO software in the first quarter of 2014, the Company has moved from a development stage enterprise into full commercialization. This has provided revenue from hardware, software, licensing and service and support.


Revenue by Segment

The proportion of the total revenue attributable to each segment is outlined in the following table:

    Three Months ended     Nine Months ended  
    September 30,     September 30,  
In thousands   2014     2013     2014     2013  
    (unaudited)     (unaudited)     (unaudited)       (unaudited)  
       Hardware and Software $  1,409   $ -   $ 3,345   $  -  
       License fees   27       -     592     -  
       Service and Support   180       -     435     -  
Total $  1,616   $ -   $ 4,372   $  -  

Hardware and Software revenue in the quarter increased by 7.1% over the second quarter of 2014, while total revenue declined due to seasonality, a decline in license fees associated with the Overland Storage initial license fees and the launch of the V3 line of Converged Infrastructure through Overland in the first half of the quarter. Upon completion of the merger agreement with Overland Storage, the Company will be able to recognize 100% of the revenue derived through Overland on the sale of Hardware, Software and Services and Support from the V3 product line.

The Company anticipates a continued growth in revenue as the Company continues its inroads in the Health, Education and Government sectors and broadens its product offering.

Cost of Goods Sold

Cost of goods sold for the three and nine months ended September 30, 2014 were $873 and $2,148, respectively, providing a gross margin of 46% and 51% respectively. Management expects that gross margins will fluctuate as it continues to introduce its products in various markets and takes an aggressive approach to pricing as part of its short term growth strategy.

Expenses

Salaries and consulting for the three and nine months ended September 30, 2014 were $889 and $1,967 respectively, compared to $146 and $886, respectively, for the three and nine months ended September 30, 2013. The increase in expenses, was the result of the Company expanding its sales, marketing and support staff throughout fiscal 2013 and early 2014. The Company expects to add additional staff in sales, marketing and research & development during the remainder of fiscal 2014.

Stock based compensation for the three and nine months ended September 30, 2014 were $869 and 2,053 respectively, compared to $54 and $101, respectively, for the three and nine months ended September 30, 2013. The increase in expenses, was the result of the Company issuing stock options as part of its ongoing hiring and staff retention processes. Charges for Stock based compensation are based on Black Scholes calculations, which result in higher expenses as the market price and the exercise price on the option awards increase.


General and administrative expenses were $966 and $1,764, respectively, for the three and nine months ended September 30, 2014 compared to $191 and $515, respectively, for the three and nine months ended September 30, 2013. General and administrative expenses increased significantly in the third quarter of 2014 as the Company accelerated it roll-out of new products and added a sales and support office in the United States.

Amortization of intangibles was $1,147 and $2,296, respectively, for the three and nine months ended September 30, 2014 compared to $1 and $3 for the three and nine months ended September 30, 2013. Amortization of the acquired and developed technology commenced in the second quarter of 2014 and will continue through the expected useful life.

Amortization of property and equipment for the three and nine months ended September 30, 2014 were $77 and $241 respectively, compared to $50 and $146 for the three and nine months ended September 30, 2013. The Company expects to continue growing its capital asset base resulting in continued growth in amortization.

Financing (income)/expenses were $(32) and $119, respectively, for the three and nine months ended September 30, 2014 compared to $27 and $27 for the three and nine months ended September 30, 2013. Financing expenses included both realized and unrealized foreign exchange and holding gains along with interest costs and derivative liability costs related to the debenture financing entered into by the Company on March 21, 2014.

Merger agreement costs for the three and nine months ended September 30, 2014 were $579 and $935 respectively, compared to $Nil for the three and nine months ended September 30, 2013. The costs related to the announced plan of merger between a wholly owned subsidiary of the Company and Overland Storage, Inc. and include legal, accounting and other costs that are expensed as incurred under IFRS requirements.

The net comprehensive loss for the three and nine months ended September 30, 2014 was $3,753 or $0.16 per share and $7,150 or $0.31 per share, respectively, compared with a net comprehensive loss in the three and nine months ended September 30, 2013 of $469 or $0.03 per share and $1,678 or $0.10 per share, respectively. The increases in losses were mainly driven by non-cash or non-operating expenses incurred over the quarter. The Company expects to continue to have significant non-cash expenses going forward as recognizes the value of the acquired and developed technology.

Financial Position

Sphere 3D's cash position decreased during the nine months ended September 30, 2014 by $2,563 compared to a decrease of $239 for the nine months ended September 30, 2013.

Operating activities required cash of $4,229, after adjustments for non-cash items and changes in other working capital balances, compared to $1,178 during the nine months ended September 30, 2013. The increase in use was mainly related to an increase in net working capital assets as revenue increased.

Investing activities required cash of $15,163 during the nine months ended September 30, 2014 compared to $422 for the nine months ended September 30, 2013. The increase related to the acquisition and development of technology and intangible assets, the acquisition of property and equipment to support Sphere 3D’s ongoing development work and loans made to support Overland’s working capital requirements as the merger arrangement is completed. .


Financing activities generated $16,830 during the nine months ended September 30, 2014 compared to $1362 for the nine months ended September 30, 2013. Financing activities included the sale of special warrants in June 2014, which converted to 1,235,325 shares of common stock and 617,663 common share purchase warrants on October 6, 2014, the closing of the 4 year 8% debenture financing on March 21, 2014 and the ongoing exercise of options and warrants. The Company expects that it will continue to receive cash from warrant exercises through the remainder of the year.

Liquidity and Capital Resources

At September 30, 2014 and December 31, 2013, Sphere 3D had the following:

    September 30, 2014     December 31, 2014  
  $    $   
             
Cash   2,988     5,551  
             
Working Capital:            
         Current assets   7,841     6,839  
         Current liabilities   (6,840 )   (983 )
       Contingent earn-out(1)   4,085     -  
             
Adjusted working capital   5,086     5,856  
(1) The Contingent earn-out is payable in cash or shares at the discretion of the Company.        

On October 17, 2014, the Company received a $2.5 million USD cash repayment of Promissory Notes outstanding from Overland Storage, Inc.

SUMMARY OF OUTSTANDING SHARES AND DILUTIVE INSTRUMENTS

The authorized capital of the Company consists of an unlimited number of common shares, of which 25,104,585 common shares were issued and outstanding as of the date of this MD&A.

Certain common shares of the Company are subject to escrow in accordance with TSXV policies. There are two separate escrow agreements in place which are subject to different rates of release. The following table summarizes the common shares that were issued by the Company and are subject to and held under each escrow and the dates of release therefrom:

    Surplus Share     Value Share              
    Escrow           Escrow           Total  
    Number     %     Number     %     Number     %  
                                     
Balance at December 21, 2012   4,655,000     100     4,306,253     100     8,961,253     100  
                                     
Released - December 27, 2012(1)   232,750     5     430,625     10     663,375     7  
Released - June 27, 2013   232,750     5     645,937     15     878,687     10  
Released - December 27, 2013   465,500     10     645,937     15     1,111,437     13  
                                     
Total subject to escrow at December 31, 2013   3,724,000     80     2,583,754     60     6,307,754     70  
Released - June 27, 2014   465,500     10     645,937     15     1,111,437     13  
                                     
Total subject to escrow at                                    
September 30, 2014   3,258,500     70     1,937,817     45     5,196,317     57  
                                     
Future releases                                    
                                     
December 27, 2014   698,250     15     645,939     15     1,344,189     15  
June 27, 2015   698,250     15     645,939     15     1,344,189     15  
December 27, 2015   1,862,000     40     645,939     15     2,507,939     27  
                                     
Total future releases   3,258,500     70     1,937,817     45     5,196,317     57  
(1) Date of issuance of TSXV exchange bulletin announcing the commencement of trading of the Company’s stock.        


Escrowed shares are subject to release every six months from the date of the exchange bulletin, at the rate shown. Release rates can change if the Company were to move to the TSX Tier 1 Exchange. As well, if the operations or development of the Intellectual Property or the business are discontinued then the unreleased securities held in the QT Escrow will be cancelled.

The Company has warrants outstanding to purchase up to an aggregate of 1,825,155 common shares, at an average exercise price of $5.47.

The stock option plan (the “Option Plan”) of the Company is administered by the Board of Directors, which is responsible for establishing the exercise price (at not less than the Discounted Market Price as defined in the policies of the TSX Venture Exchange) and the vesting and expiry provisions. The maximum number of common shares reserved for issuance for options that may be granted under the Option Plan is 20% of the number of common shares outstanding at the time of the record date for the last shareholders’ meeting, or 4,625,000 Options. As of the date of this MD&A, Options granted under the Option Plan to purchase up to an aggregate of 3,295,000 common shares are issued and outstanding.

Assuming that all of the outstanding options and warrants are exercised, 30,224,740 common shares would be issued and outstanding on a fully diluted basis. In addition, upon closing of the Overland acquisition, the Company will be issuing 8,579,310 shares of common stock to existing Overland shareholders and warrants, stock options, RSU equivalents which could convert to an additional 1,922,785 shares of common stock.

Related Party Transactions

Related parties of the Company include the Company’s key management personnel and independent directors.

Key management personnel are those persons having authority and responsibility for planning, directing and controlling the activities of the Company, directly or indirectly, including any director (whether executive or otherwise).

The compensation paid or payable to key management personnel is shown below:



    September 30     September 30  
    2014     2013  
Salaries, management fees and benefits $  403,750   $  440,000  
Share-based payments - management   207,314     38,365  
Share-based payments - directors   214,871     81,656  
  $  825,935   $  560,021  

Legal services of $365,200 (2013 - $74,076) were provided by a legal firm affiliated with a director of the Company. Professional services of $25,000 (2013 - $Nil) were provided by a company controlled by a director of the Company

Amounts owing to a legal firm affiliated with a director of the Company and officers and directors of the Company at period end included in trade and other payables total $211,439 (2013 - $13,265)



Quarterly Information                                            
                                             
Quarterly Information (in thousands, except loss per share)                          
                                                 

 

  Sep     Jun     Mar     Dec     Sep     Jun     Mar     Dec  

 

  2014     2014     2014     2013     2013     2013     2013     2012  

Revenue

$ 1,616   $ 1,751   $  1,005   $  -   $  -   $  -   $  -   $  -  

Cost of sales

  873     841     433                                

Gross margin

  743     910     572     -     -     -     -     -  

Expenses

  4,496     3,923     956     700     469     564     645     1,055  

Net comprehensive loss

 

$ (3,753 ) $ (3,013 ) $  (384 ) $  (700 ) $  (469 ) $  (564 ) $  (645 ) $  (1,055 )

 

                                               

Loss per share

$  (0.16 ) $  (0.13 ) $ (0.02 ) $  (0.04 ) $  (0.03 ) $  (0.04 ) $  (0.04 ) $  (0.08 )

 

                                               

Weighted average number of shares

23,567 23,314 21,692 19,868 17,188 16,114 16,114 13,737

 

                                               

 

  Sep     Jun     Mar     Dec     Sep     Jun     Mar     Dec  

 

  2014     2014     2014     2013     2013     2013     2013     2012  

 

                                               

Cash

$  2,988   $  8,783   $  7,141   $  5,551   $  1,395   $  494   $  1,054   $  1,633  

Total assets

$  34,700   $  35,585   $  27,240   $  8,896   $  3,896   $  1,901   $  2,555   $  3,211  

Working capital

$  983   $  5,914   $  5,026   $  5,856   $  1,842   $  563   $  1,078   $  1,729  


Sphere 3D Corporation: Exhibit 99.3 - Filed by newsfilecorp.com

Form 52-109FV2

Certification of Interim Filings
Venture Issuer Basic Certificate

I, Peter Tassiopoulos, Chief Executive Officer of Sphere 3D Corporation, certify the following:

  1.

Review: I have reviewed the interim financial report and interim MD&A (together, the “interim filings”) of Sphere 3D Corporation (the “issuer”) for the interim period ended September 30, 2014.

     
  2.

No misrepresentations: Based on my knowledge, having exercised reasonable diligence, the interim filings do not contain any untrue statement of a material fact or omit to state a material fact required to be stated or that is necessary to make a statement not misleading in light of the circumstances under which it was made, with respect to the period covered by the interim filings.

     
  3.

Fair presentation: Based on my knowledge, having exercised reasonable diligence, the interim financial report together with the other financial information included in the interim filings fairly present in all material respects the financial condition, financial performance and cash flows of the issuer, as of the date of and for the periods presented in the interim filings.

Date: December 1, 2014

“Peter Tassiopoulos”
_______________________
Peter Tassiopoulos
Chief Executive Officer


NOTE TO READER

In contrast to the certificate required for non-venture issuers under National Instrument 52-109 Certification of Disclosure in Issuers’ Annual and Interim Filings (NI 52-109), this Venture Issuer Basic Certificate does not include representations relating to the establishment and maintenance of disclosure controls and procedures (DC&P) and internal control over financial reporting (ICFR), as defined in NI 52-109. In particular, the certifying officers filing this certificate are not making any representations relating to the establishment and maintenance of

i)      controls and other procedures designed to provide reasonable assurance that information required to be disclosed by the issuer in its annual filings, interim filings or other reports filed or submitted under securities legislation is recorded, processed, summarized and reported within the time periods specified in securities legislation; and

ii)      a process to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with the issuer’s GAAP.

The issuer’s certifying officers are responsible for ensuring that processes are in place to provide them with sufficient knowledge to support the representations they are making in this certificate. Investors should be aware that inherent limitations on the ability of certifying officers of a venture issuer to design and implement on a cost effective basis DC&P and ICFR as defined in NI 52-109 may result in additional risks to the quality, reliability, transparency and timeliness of interim and annual filings and other reports provided under securities legislation.
 



Sphere 3D Corporation: Exhibit 99.4 - Filed by newsfilecorp.com

Form 52-109FV2

Certification of Interim Filings
Venture Issuer Basic Certificate

I, Scott Worthington, Chief Financial Officer of Sphere 3D Corporation, certify the following:

  1.

Review: I have reviewed the interim financial report and interim MD&A (together, the “interim filings”) of Sphere 3D Corporation (the “issuer”) for the interim period ended September 30, 2014.

     
  2.

No misrepresentations: Based on my knowledge, having exercised reasonable diligence, the interim filings do not contain any untrue statement of a material fact or omit to state a material fact required to be stated or that is necessary to make a statement not misleading in light of the circumstances under which it was made, with respect to the period covered by the interim filings.

     
  3.

Fair presentation: Based on my knowledge, having exercised reasonable diligence, the interim financial report together with the other financial information included in the interim filings fairly present in all material respects the financial condition, financial performance and cash flows of the issuer, as of the date of and for the periods presented in the interim filings.

Date: December 1, 2014

“Scott Worthington”
_______________________
Scott Worthington
Chief Financial Officer


NOTE TO READER

In contrast to the certificate required for non-venture issuers under National Instrument 52-109 Certification of Disclosure in Issuers’ Annual and Interim Filings (NI 52-109), this Venture Issuer Basic Certificate does not include representations relating to the establishment and maintenance of disclosure controls and procedures (DC&P) and internal control over financial reporting (ICFR), as defined in NI 52-109. In particular, the certifying officers filing this certificate are not making any representations relating to the establishment and maintenance of

i)      controls and other procedures designed to provide reasonable assurance that information required to be disclosed by the issuer in its annual filings, interim filings or other reports filed or submitted under securities legislation is recorded, processed, summarized and reported within the time periods specified in securities legislation; and

ii)      a process to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with the issuer’s GAAP.

The issuer’s certifying officers are responsible for ensuring that processes are in place to provide them with sufficient knowledge to support the representations they are making in this certificate. Investors should be aware that inherent limitations on the ability of certifying officers of a venture issuer to design and implement on a cost effective basis DC&P and ICFR as defined in NI 52-109 may result in additional risks to the quality, reliability, transparency and timeliness of interim and annual filings and other reports provided under securities legislation.